Brands

BROWSE BY MANUFACTURER

Different brands.
One sourcing enquiry.

Bring your multi-brand maintenance list to BESTWELL for sourcing support across industrial automation manufacturers, with one point of contact for the references and quantities your team needs.

Include every part-number suffix and revision, clear nameplate photographs, the destination and your target date.

Send your parts list
  • 330730-080-00-00: Full cable
    330730-080-00-00 Bently Nevada 8 m Standard Extension Cable
    Bently Nevada 330730-080-00-00 is an 8.0 m standard cable for the 3300 XL 11 mm proximity transducer system. Cable code 00 and approval code 00 define this configuration. Pair it with the correct probe length and calibrated Proximitor system length.
    Read More
  • 330730-080-11-05: Full cable
    330730-080-11-05 Bently Nevada 8 m Armored FluidLoc Extension Cable
    Bently Nevada 330730-080-11-05 is an 8.0 m armored fluidloc cable for the 3300 XL 11 mm proximity transducer system. Cable code 11 and approval code 05 define this configuration. Pair it with the correct probe length and calibrated Proximitor system length.
    Read More
  • 3500/33 149986-01: Full module
    3500/33 149986-01 Bently Nevada 16-Channel Relay Control Module
    Bently Nevada 3500/33 149986-01 is the front 16-Channel Relay Control Module spare. It implements configured alarm voting logic in the 3500 rack; the separate rear relay I/O determines the contact and fail-safe output option.
    Read More
  • 3500/25 149369-01: Full module
    3500/25 149369-01 Bently Nevada Enhanced Keyphasor Module
    Bently Nevada 3500/25 149369-01 is a half-height, two-channel Enhanced Keyphasor Module. It converts proximity-probe or magnetic-pickup signals into digital timing references for the 3500 rack. The front spare and its rear Keyphasor I/O are selected separately.
    Read More
  • 3500/45 176449-04: Full module
    3500/45 176449-04 Bently Nevada Position Monitor
    Bently Nevada 3500/45 176449-04 is a four-channel Position Monitor for axial thrust, differential expansion, case expansion and valve-position measurements. Select the rear I/O for the required proximity, RPT, DC LVDT, AC LVDT or rotary-potentiometer transducer.
    Read More
  • 330400-02-05: Full accelerometer
    330400-02-05 Bently Nevada 100 mV/g M8 Accelerometer
    Bently Nevada 330400-02-05 is a three-wire piezoelectric accelerometer for casing acceleration measurements. It uses an M8 × 1 integral stud, 100 mV/g nominal sensitivity and a 50 g peak range within 10 Hz–15 kHz. Approval suffix 05 selects multiple approvals.
    Read More
  • 330400-02-00: Full accelerometer
    330400-02-00 Bently Nevada 100 mV/g M8 Accelerometer
    Bently Nevada 330400-02-00 is a three-wire piezoelectric accelerometer for casing acceleration measurements. It uses an M8 × 1 integral stud, 100 mV/g nominal sensitivity and a 50 g peak range within 10 Hz–15 kHz. Approval suffix 00 specifies no agency approval option.
    Read More
  • 330425-01-05: Full accelerometer
    330425-01-05 Bently Nevada 330425 Accelerometer
    Bently Nevada 330425-01-05 is a three-wire piezoelectric accelerometer for casing acceleration measurements. This configuration uses a ¼-28 UNF integral mounting stud and approval option 05. The 330425 provides 25 mV/g sensitivity and a 75 g peak range within the specified 10 Hz–15 kHz span.
    Read More
  • 330425-02-05: Full accelerometer
    330425-02-05 Bently Nevada 330425 Accelerometer
    Bently Nevada 330425-02-05 is a three-wire piezoelectric accelerometer for casing acceleration measurements. This configuration uses a M8 × 1 integral mounting stud and approval option 05. The 330425 provides 25 mV/g sensitivity and a 75 g peak range within the specified 10 Hz–15 kHz span.
    Read More
  • 990-04-70-02-00: Full transmitter
    990-04-70-02-00 Bently Nevada 990 Vibration Transmitter
    Bently Nevada 990-04-70-02-00 is a two-wire, loop-powered 990 vibration transmitter with a 0–4 mils peak-to-peak (0–100 µm) range, 7.0 m calibrated system length and bulkhead screws mounting. It works with a matched 3300 NSv proximity probe and extension cable to provide a proportional 4–20 mA vibration signal.
    Read More
  • 990-04-50-02-00: Full transmitter
    990-04-50-02-00 Bently Nevada 990 Vibration Transmitter
    Bently Nevada 990-04-50-02-00 is a two-wire, loop-powered 990 vibration transmitter with a 0–4 mils peak-to-peak (0–100 µm) range, 5.0 m calibrated system length and bulkhead screws mounting. It works with a matched 3300 NSv proximity probe and extension cable to provide a proportional 4–20 mA vibration signal.
    Read More
  • 990-05-50-01-05: Full transmitter
    990-05-50-01-05 Bently Nevada 990 Vibration Transmitter
    Bently Nevada 990-05-50-01-05 is a two-wire, loop-powered 990 vibration transmitter with a 0–5 mils peak-to-peak (0–125 µm) range, 5.0 m calibrated system length and 35 mm din rail mounting. It works with a matched 3300 NSv proximity probe and extension cable to provide a proportional 4–20 mA vibration signal.
    Read More
leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.