Illustrative PLC and DCS automation hardware lineup
Quotation & availability

Quotation & availability

Start with the reference, quantity and date you need.

Is my part available, and how do I get a quotation?

Availability is checked for your exact part number and required quantity. Catalogue listings show the products we can help source; they are not a live stock commitment. Send the full reference, quantity, destination and required date so we can provide the available supply information and a written quotation.

Can you source obsolete or unlisted parts?

Yes. We review sourcing requests for obsolete, hard-to-find and unlisted automation parts. The available item and timing depend on the complete reference and current supply options. Send the nameplate, full model and quantity, including any revision or condition requirements.

What information will my quotation cover?

The quotation identifies the offered reference, quantity, product condition, included items, price and estimated dispatch arrangements. Payment, freight and warranty terms should be agreed before ordering. Tell us about required accessories, documentation or delivery restrictions when you request the quote.

How do I place an order or change a quotation?

Review the written quotation and confirm the items and terms you accept with your sales contact. Any change to quantity, reference, condition, destination or timing needs written confirmation before processing. Keep your quotation and purchase-order references together for later updates.

Part identification & replacements

Part identification & replacements

Match the complete reference to the installed system.

How do I confirm the exact part number and configuration?

Use the complete manufacturer reference, including every suffix and available hardware or firmware revision. Photographs of the label, front, connectors and installed rack help clarify the requirement. List any rear I/O module, terminal assembly, cable or accessory separately so the supply scope can be checked.

Can you help if the label is unclear or the model is incomplete?

Yes. Clear photographs and equipment details can help us review possible references. An image alone may not establish the complete configuration. Send the best label photo available, the installed system name and photographs of the connections; confirm the final selection with your engineer before ordering.

Can another model replace my installed part?

A proposed alternative needs a technical review before it is ordered or installed. Your engineer should check ratings, mechanical fit, firmware, configuration and system requirements against the applicable manufacturer documentation. Send both references and the installed equipment details so we can help collect the information for that review.

What should I provide for an urgent shutdown requirement?

Mark the enquiry as urgent and state the latest acceptable arrival date. Include the full reference, quantity, destination and any mandatory revision or condition requirement. These details let us assess the available supply and transport options against your deadline; a requested date becomes a commitment only when expressly agreed.

Can I request a datasheet, manual or revision information?

Yes. We can help identify available documents for the reference you provide. The document must match the product family and revision, especially for installation and configuration. Send the full model, revision and the document or technical information you need.

Delivery, shipping & customs

Delivery, shipping & customs

Separate availability, dispatch and transit time.

When can my order be dispatched and delivered?

Dispatch timing is confirmed for the specific order after the supply and order requirements are reviewed. Arrival also depends on the agreed carrier service and customs processing. Give us your destination and required date, then review the estimated dispatch and transport arrangements in the quotation before ordering.

How do I track my order or follow up on a delay?

Your sales contact can help check the current order stage and available shipment information. Use your quotation or order reference so sourcing, dispatch and carrier updates stay connected. If your deadline changes or a shipment appears delayed, send the reference and tracking number, if available.

Which shipping and customs documents can I request?

Document requirements are reviewed for the shipment and destination. Share your consignee details and required invoice, packing-list, origin or other documentation before ordering so availability and any extra arrangements can be confirmed. Check the agreed delivery terms for the allocation of taxes, duties and import responsibilities.

What should I do if the parcel arrives damaged or items are missing?

Keep the packaging and record the issue before discarding or altering anything. Photograph the outer package, shipping label, internal packing and affected items, then send them with the order and tracking references to your sales contact. We will review the delivery concern and advise the next steps; return or replacement arrangements depend on the findings and agreed terms.

Product condition, quality & warranty

Product condition, quality & warranty

Know the offered condition, evidence and after-sales route.

Are the products new, and what is included?

We supply new industrial automation parts. The quotation identifies the offered item, packaging and included accessories; new condition does not by itself establish a particular production date, firmware revision or packaging format. Include any required revision, factory packaging or accessory details with your enquiry so they can be confirmed.

Can I see photographs of the actual item before ordering?

You can request photographs of the offered unit, labels and packaging. Availability of item-specific images is confirmed during the quotation process. Tell us which details you need to see, such as the full model, serial number, connectors or packaging, and review them alongside the written supply description.

Is every product functionally tested before shipment?

Functional testing is not a universal service for every item. The checks and evidence available depend on the product, equipment and agreed scope; a visual inspection is different from a functional test. State your inspection or test requirements before ordering and confirm the available scope in writing.

What warranty does Bestwell provide?

Bestwell provides a 12-month seller warranty. This is Bestwell warranty support and is separate from any manufacturer warranty. The start date, coverage, exclusions and claim arrangements must be stated in the written quotation or accepted order; request these details before you place the order.

What should I do if a part develops a fault?

Contact Bestwell with the order reference, full model, serial number and a clear fault description. Add photographs and relevant diagnostic messages, and explain when and how the issue appeared. We will review the information and advise the next steps under the agreed warranty terms; request return instructions before sending the item back.

Can I return an unused or incorrectly ordered part?

A return needs review and approval before the item is sent back. Eligibility depends on the reason, item condition and agreed order terms, so an unused item is not automatically returnable. Send the order reference, return reason and photographs, and obtain written instructions covering the return address, packing and freight responsibilities.

How are repair, replacement or refund decisions made?

The remedy follows the assessment of the issue and the accepted order or warranty terms. An approved return does not itself confirm a refund. Keep the item identification and supporting evidence available, and ask your sales contact to confirm the agreed outcome, any required return and the next update in writing.

Payment & invoices

Payment & invoices

Agree the payment details before the order is processed.

Which payment methods and currencies are available?

The supported payment method, currency and payment schedule are confirmed with your written quotation. Tell us your preferred method and currency when you enquire so we can check the available arrangements. Review the invoice instructions before payment; any credit terms require separate agreement.

What information do you need for an invoice?

Provide your company legal name, billing address, delivery address and applicable tax or registration details. If your process requires a pro forma invoice or purchase-order reference, include that request. Review the company name, currency, item details and payment instructions before payment.

Why are prices quoted individually, and are shipping charges included?

Pricing depends on the exact reference, revision, quantity and sourcing route. Shipping and other charges depend on the destination and agreed delivery terms. Ask the quotation to separate the item price and freight and identify any excluded taxes, duties or additional services before you accept it.

Volume orders & distributor support

Volume orders & distributor support

Keep multi-line requirements and onward commitments clear.

Can I send a list of different brands and models?

Yes. Send one line per complete part number with the quantity, required revision and target date. Mark urgent items and indicate whether partial supply is acceptable. We review supply information and quotation details by line so you can compare the options clearly.

Can you support volume enquiries or scheduled purchasing?

We can review quantity-based and scheduled requirements. Pricing, staged delivery and any stock reservation depend on the specific parts and written agreement. Share the quantities, release schedule and destination, including which dates are essential, before committing to your own customer.

Can I request special packing or delivery to my customer?

You can include packing, labelling and onward-delivery requirements in your enquiry. The available arrangements and any cost need confirmation before ordering. Provide the delivery address and required documents, and confirm the agreed handling with your quotation.

What should a distributor confirm before reselling a part?

Confirm quotation validity, the offered reference and condition, included items, estimated timing and warranty terms before quoting your customer. How Bestwell warranty support applies to an onward sale must be agreed for that order. Tell us about the resale arrangement and keep the original order and item references available for follow-up.

Company & supplier information

Company & supplier information

Find the right contact and prepare your supplier review.

What does Bestwell supply?

Bestwell sources and supplies multi-brand industrial automation spare parts, including PLC, DCS, safety-system and machinery-monitoring components. We handle current, obsolete and hard-to-find requirements. Send the complete reference so we can check the requested item and available supply options.

Can you help with supplier approval and quality documents?

Yes. Send your vendor-registration checklist and the company or quality documents your procurement team needs. We will review the available information for your approval process. Check each certificate for its issuing body, validity and applicable company or scope rather than treating a website badge as the complete evidence.

Who handles my enquiry and after-sales questions?

Your Bestwell sales contact can coordinate the quotation, model clarification, order updates and after-sales follow-up. Include your quotation or order reference in each message so the same requirement can be traced. Contact sales8@amikon.cn or WhatsApp +86 18030235313 with your full part number and quantity.

Direct enquiry and purchasing support

BESTWELL / DIRECT ENQUIRY

Still need help with your part?

Send the full part number, quantity and required date. Add the destination and a nameplate photo to help us check your requirement.

YOUR PARTS CONTACT

Your requirement,
in one place.

Share the full model, quantity and required date. Add the suffix, revision or firmware version where relevant.

Have a parts list or an existing order?
Email your list or quotation reference.

Illustrative scene of an automation module label being checked before protective packaging
Component identification · Illustrative scene
REQUEST A QUOTE

Tell us what you need.

A complete reference helps us check the right part.

JPG, PNG, WebP or PDF · Up to 10 MB

Your enquiry will be sent to the Bestwell team. For urgent requirements, contact us through WhatsApp.

leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.